Parts
BiomedBuddy can supply any used part at this time for the STAGO Units. BiomedBuddy has nine complete, working units to ensure you get good working parts. BiomedBuddy will continue to improve our supply chain in order to provide many new parts in the future. Any item listed as (New) is part of an established supply chain.
BiomedBuddy has a consignment program to sell your unwanted parts or accessories. Any item listed as (New, under consignment) is part of the consignment program.
Let us sell your new needles, cuvette wheels and other accessories. Contact BiomedBuddy for details.
- Autoclavable 121 degrees Celsius
- Max speed 125 rpm
- Max load 6 x 140g 2 x 30g
- Rotor Type: VTi 80
- Maximum Speed (rpm): 80,000
- Relative Centrifugal Field (x g) at r max: 510,000
- Tube Angle (degrees): 0
- K Factor: 8
- Number of Tubes x Tube Capacity (mL): 8 x 5.1
Like Brand new rotor
Fixed-Angle Rotor
6 x 85 mL Max Tube capacity
Model F34-6-38
For use in Eppendorf Centrifuges 5804/5804R/5810/5810R
Features:
- High-speed rotor for molecular applications in tubes from 0.2 mL to 85 mL.
- Max. speed 18,500 × g (12,000 rpm) in Centrifuge 5810 R or 15,500 × g (11,000 rpm) in -5804/5804R/5810.
- 34̊ borehole angle reduces pellet smears along tube wall.
- Anodized aluminum for high chemical resistance.
- Rotor, lid and adapters are autoclavable.
• 6 x 50mL
• Max RCF 20,010 x g
• 90 degree angle
• Diameter tube 1.14" or 29mm
• K factor 1765
• Aluminum
- Tube length 4.1" or 104mm
- 10.3 lbs or 4.67 kg
- Radius max 5.76" or 146.3mm
- Radius min 1.77" or 45 mm
- min RCF 11,855 x G
- Compatible with Sorvall Legend Mach 1.6, 1.6-R, Heraeus Multifuge 1S
- Maximum speed: 4,700 rpm
- 4 x 400mL capacity
- Max RCF: 4,618 x g
Maximum Speed: 3600 rpm
Maximum Capacity: 4 x 250 mL
Maximum RCF: 2190 x g
Designed for use with Sorvall T6000 and RT6000 series centrifuges
| Specification | ||
|---|---|---|
| Manufacturer | DuPont Sorvall | |
| Part Number | H1000B | |
| Approximate Weight | 6 lbs | |
| Width | 11 7/16 Inches | |
| Height | 2 ½ Inches | |
| Length | 11 7/16 Inches | |
| Version | Tan |
Maximum speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 000 rpm Critical speed range*. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 600 to 800 rpm Density rating at maximum speed. . . . . . . . . . . . . . . . . . . . . . . . . 1.2 g/mL Maximum allowable imbalance of opposing loads. . . . . . . . . . . . . 2 grams Relative Centrifugal Field† at maximum speed At rmax (108 mm) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 400 × g At rav (70 mm) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 400 × g At rmin (32 mm) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 300 × g k factor at maximum speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 769 Conditions requiring speed reductions . . . . . . . . . . . . . . . see RUN SPEEDS Number of tube cavities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Available tubes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . see Table 3 Nominal tube dimensions (largest tube) . . . . . . . . . . . . . . . . . 29 × 104 mm Nominal tube capacity (largest tube) . . . . . . . . . . . . . . . . . . . . . . . . 50 mL Nominal rotor capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400 mL Approximate acceleration time to maximum speed (rotor fully loaded). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1/2 min Approximate deceleration time from maximum speed (rotor fully loaded). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 1/2 min Weight of fully loaded rotor . . . . . . . . . . . . . . . . . . . . . . . . 7.4 kg (16.5 lb) Rotor material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . aluminum Rotor entry code for J2 and J6 series microprocessorcontrolled centrifuges. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20.2 Rotor entry code for Avanti J-E centrifuges . . . . . . . . . . . . . . . . . . . . . . 20
- Max speed 19,000 rpm
- Max RCF 53,900 x g
- K factor 951
- t s min 34.4mm
- t s max 133.4mm
- Nominal rotor capacity 1500mL
Trackball input device. Brand new in original packaging.
- For 30 x 1.5/2 mL tubes
- Max speed 20,800 x g (14,000 rpm)
- Aluminum
- 4 x 250 mL
- 7,500 rpm max
Swing on bucket
- Fixed Angle: 30
- Max Speed: 100,000 RPM
- Max RCF: 436,000 x g
- Max K factor: 12
- Number of tubes x Nominal Capacity (largest tube): 10x2.0 ml
- Rotor Capacity: 20.0 ml
- Rotor material: Titanium
- Lid matierial: Aluminium
Item came from a working IEC PR-7000 which my company has been maintaianed under a service contract.
- capacity 8 x 50 mL
- Max RCF 50,228 x g
- 34 degree angle
- 25,000 rpm
- Tube diameter 1.14" or 29 mm
- Aluminum
- Tube length 4.25" or 108 mm
- 31.75 lbs" or 15 kg
- Radius max 4.2" or 107mm
- Radius min 1.3" or 32.7 mm
Item is brand new with no flaws. Max rpm 4,000
- 24-place tube array holds 1.5 mL/2.0 mL tubes
- Includes certified aerosol-tight lid for working with hazardous samples
- Rotor and lid are autoclavable at 121 degrees C for 20 minutes
- For use with Eppendorf microcentrifuge model 5424 (sold separately)
- For Model 5424 Microcentrifuge, 1.5/2.0mL Tube Capacity
- 6 slots
- Diameter 14"
- 20 degree angle
- 9000 rpm
- Maximum relative centrifugal force 13,700
This is a brand new rotor. For 30 x 1.5/2 mL tubes. Max rpm=14,000
- Max speed 30,000
- K factor 213
- Capacity 12 x 38.5 (mL)
- Max speed 17,000 rpm
- Capacity 12 x 50 mL
- K factor 747
Tube dimensions 39 x 108
Fixed-angle 34 degrees
-
G force: 543,000 x g
- 100,000rpm max
- 8 cavities
- Tubes/volume: 8 x 5.1 mL
- Rotor capacity: 40.8 mL
K factor: 25
Titanium
Used RC5B Plus, RC5B and other Sorvall Centrifuges. Items have been tested and are in working order.
Item is all in one computer with no power adapter
Circuit board for ultracentrifuge. Like brand new.
Heater assembly and the cable which goes between the unit and the heater.
Forma 3164 CH/P Monitor & Alarm module
Plug in modular for the Forma Scientific Incubator, which controls the temperature alarm set point.
New, In stock Item
3 tubings needle electrovalves for the STA Compact, manufactured by Diagnostica Stago. The 3 way electrovalve is used for control of the fluidic system and transferring the cuvettes.
Item condition is new.
Water heating pads located under the chamber used to provide humidity to the system.
Sorvall Motor and Gyro: completely rebuilt, disassembled and cleaned, then reassembled with new armature, insulators, upper and lower plate gasketts, and bearings.
Used in the STA Compact
Located: In CPU Cage on the left side of the unit.
Controls: Controls communication to the 4-axis boad, Measuremtent CPU, Idntification Bd, and the DC Motor Bd.
Can effect: LLD, Z motors,sample and product drawers, Measurement, x and y Motors
Plug in modular for the Forma Scientific Incubator, which controls the zero, and span adjustments.
Cable and connector which provides power from the unit to the door heaters.
Eppendorf Control Board, used on 5810 centrifuge....Used
Eppendorf PCB Converter, used on 5415R Centrifuge.
Working brake assembly for RC5B. There are several revisions. This came from the back center of the unit. We currently have two other revisions of this board. This brake assy. works for the RC5B plus also
Used service manual under consignment for the STA Compact. Up to date manual in like new condition.
Standard needle for the STA Compact. Same needle is used on the STAIR/Evolution except the tubing is longer on the STAR/Evolution.
Ventana Benchmark Carousel Assembly with Smart Carousel Board.
This unit is for cap piercing units only.
The manufacture of this unit is under contract not to sell this pump to anyone but Diagnostica Stago, but we have contracted out the rebuilding of this pump.
Bearings and rebuilt kit are installed and then tested.
New, In Stock Item. There are two types of cooling pumps which take different rebuild kits.
Z Motor for movement of needles
Bridge Diode that supplies DC voltages to the fore power supplies.
EV valve for cap piercing systems
This is the motor which pulls the cuvettes into the cuvette loader.
Maintains the proper temperature to head #3 of the pipetting head. This is located in the pipetting head of the STA Compact.
This is located behind the right side drawer of the STA Compact. It always should have cleaning solution in it.
Optical Module provides the light to make photometric tests. This unit is also the fix for failure to communicate to measurement block. We test this unit prior to shipment.
Used Optical Module are available at 50% or below the new cost. They are also tested prior to shipping and have a year warranty on them.
This is used on the STAR and the Evolution.
Product Detection Board used for the detection of products in the Product Drawer. Bottom board of the assembly.
Large waste bottle back right of instrument
STA Compact Cable Liquid Level Detection Needle. These are the old style LLD Cables. They will work, but the improved one are suppose to last forever.
This assy. moved the syringe up and down. Located behind the right side door.
Several new and used motors in stock.
There are two types of z motors. One is designed for cap piercing units, which are longer in length. They are used to move the three needles and the arm #2 up and down.
The price for this item is subject to change without notice.
New, In Stock Item. We keep a large inventory of new vacuum pump diahragms on hand. Two rebuild kits are needed to completely rebuild the vacuum pump.
